Wednesday 24 November 2021

How To Check If Your Water Is Fit to Drink.....

TDS (“Total Dissolved Solids”) meters measure the electrical conductivity of water. Pure water is a poor conductor, but dissolved solids carry a distinct electrical charge that correlates directly to TDS levels. The greater the charge — the higher the level of dissolved solids. It’s the quickest way to get a feel of what in your water.

This TDS meter is ideal for all water purification applications, thus to check whether your water filter is doing its job right and when to change the filter. It is very easy to use; all you need to do is to put it in the water and test.

Some water purifiers come with inbuilt TDS meters to monitor the level often.But in case you dont have you can buy it here :

https://amzn.to/3kmhSW0

- Auto-off function which turns it off after 10 minutes of inactivity.
- Package Contains: TDS METER & CARRY CASE
 
Its very simple to use
1. Turn on TDS Meter, the temperature function can be used, in or out of liquid.
2. Press TEMP button.
3. The display will switch to temperature (in Celsius only).
4. To return to TDS mode, press the TEMP button

TDS Meter with printed manual


Open this lower cap and switch it on


On switching on one can see 000



After immersing in the water it shows the TDS level of water here in this case its showing 170 which is less than 500 so its acceptable.

TDS Level (mg/l)Rating
Less than 300Excellent
300-600Good
600-900Fair
900-1200Poor
Above 1200Unacceptable


    
Quick results tells you about the water/solution in a way which is easy to read and understand from the large display screen.

 

So buy your own TDS Meter here which is not very costly and ensure the safety of your family's health in a easy way.

https://amzn.to/3kmhSW0

No comments:

Post a Comment